Return to Raco Jac-Rabbit 1/4 Scale RC

Raco Jac-Rabbit Parts

Update: All Parts are SOLD OUT!

I have lots and lots of old Raco Jac-Rabbit parts to sell. I also have some New Old Stock Raco parts. I will have to start getting the parts out and taking photos. For now, I will post the brand new parts I have made.

Shock Tower Kits & Clamps

Update: All Parts are SOLD OUT! I made Aluminum Shock Tower Kits in the following finishes: Plain Machined Aluminum, Plain Machined Aluminum Blue Anodized, Plain Machined Aluminum Red Anodized, Polished Aluminum, Polished Aluminum Blue Anodized and Polished Aluminum Red Anodized. Each have matching clamps. I sell them as a complete Raco Jac-Rabbit Shock Tower Replacement …

Floor Pan 1

Update: All Parts are SOLD OUT! Raco Jac-Rabbit Aluminum Floor Pan This body pan is for use with a Raco Jac-Rabbit 1/4 Scale R/C Car. You can judge the condition from the photos. I have restored floor pans in much worse condition than this one. You could use it the way it is or spend …

Floor Pan 2

Update: All Parts are SOLD OUT! Raco Jac-Rabbit Aluminum Floor Pan This body pan is for use with a Raco Jac-Rabbit 1/4 Scale R/C Car. You can judge the condition from the photos. I have restored floor pans in much worse condition than this one. You could use it the way it is or spend …

8 comments

Skip to comment form

  1. Do you have an idea where I could get a couple of dogbones for the Jack Rabbit? Thanks

    • Venom on December 21, 2011 at 5:50 PM
      Author
    • #

    I have lots of parts buried in my garage including Dog Bones. I am slowly working through the mess. I will start posting parts as I come across them.
    Thanks.

  3. I’m stuck where brentgolden44 is I traded a shotgun for my Jack Rabbit on Craigslist, put a good day or two into restore, and drove it for an hour than watched a dogbone get thrown into the neighbors field to never be seen again. The jack rabbit is a dust collector please help us find dogbone. Message me if you have info on getting them jackassjunkee@yahoo.com

    • Venom on December 22, 2011 at 8:07 AM
      Author
    • #

    Hopefully after the holiday, I will be able to get lots of parts on here. I think I have enough parts to build 8 or 9 Jac-Rabbits. I know I have at least 1 pair of brand new never used Dog Bones as well as many others.

    • tkastli on December 10, 2014 at 4:29 PM
    • #

    I’m looking for throttle linkage for a Jac-Rabbit by Raco, 4 new body clips and a battery pack for the car.

    The throttle linkage appears to have a small wheel at the top of the carb with several holes for linkage. It looks like maybe a wire/rod might come from the servo to the wheel and then another one from the wheel to the carb but not sure. I could also use any diagrams/ pictures that would have the carb… in it to help my high school small engines class finish this up and get it going.

    The battery needed is a 6-volt d.c. powerpac (5 sub 1.2 volt NICADS) and it looks like it has to be pretty thin where they want it put.

    Anything else (repair manuals, parts companies…) that you can suggest or help with would be greatly appreciated!

    • Venom on December 12, 2014 at 12:28 PM
      Author
    • #

    I might have the parts you are looking for as well as other info. I just moved into a new house and still have not finished unpacking as I am finishing some work on the house. I will reply again when I find the things you need. I good place to find info is quaterscalelegends.com I uploaded manuals and other info there.

  7. Iam looking for the rear gear for the box for the rear axles can anyone help me.

    • Venom on September 16, 2015 at 7:33 AM
      Author
    • #

    I have sold off all my Raco Cars and parts except for some Aluminum Shock Tower Kits. The best place to find parts is on Ebay or visit quaterscalelegends.com

Leave a Reply